Product Description

1) Stretcher for Plate

Usage: It is used to stretch the sheet for the next working procedure of making ring pull.

2) 25T Open Punch + Progressive Die (Ring-Pull Machine)

Production Capacity	80-120 pcs/min
Nominal pressure	25T
Motor power	3KW
Overall Dimension	1200*1000*1800 mm
Weight	2600 kg

Usage: 25T punch equipped with progressive die is used to punch into shape of ring pull.

3) GT2A8 Multi-Position Punch (Easy-Open Cover Combination Machine)

Slide Stroke	12.5-120mm
Times of Slide Stroke	90-110/min
Power	5.5KW
Weight	8000kg
Worktable	850*500mm

Usage: The function of the machine is closed to multi-position press machine which can complete the working procedures of embossing, ruling and riveting in a stroke for the forming of easy open lid/cover.

4) GT2C10 Vertical Injecting & Drying Machine

Production Capacity	80-110/min
Applied lid/cover diameter	52-153mm
Motor power	1.1KW 380V 50HZ
Drying power	16.5KW
Dryer temperature	normal 250℃, doordinate in it
Overall dimension	1800*980*1980mm
Weight	2000kg

Usage: The machine applies to inject and dry for coating spray on the tin cap ruling portions for rust proof.

Packaging & Shipping

Packaging: Packed into Export Wooden Case
Shipping: By Sea

Our Services

1. Warranty: One year after shipment.
2. Payment: 40% T/T advance payment. After the completion of the machines, customers can dispatch technician to our company to test it. After testified to be qualified, 60% T/T remaining payment before loading the products.
3. Installation & Commissioning
Before installation, the seller will provide machine layout drawing with dimensions, total power, single power, power interface, water &air input and output position, total water consumption. After the machines arrived and have taken seat, the buyer must connect the water and electric and air into the machines, then the sellers shall send 1technicians to install the production line. Buyer shall pay them US$60/Person/Day. And the buyer shall pay their round-trip air tickets from China jiujiang factory to buyer’s factory, the charge of visa, food transportations and accommodation in buyer’s city. And the working time of technicians is 8 hours per day. The buyer shall also provide an English-Chinese translator who will give help to technicians.
4. Power: 3 phase 4 wire, 380V, 50Hz (or according to the user’s requirements)

Easy Cap Making Line:

1. Production capacity: 80-100 pieces/minutes
2. Production process: tinplate plate or aluminum plate (1) -- press lid(NCP-008A full automatic feeding NC punch) (2)-- rounding edge of lid (2B7A edge rounding machine) (3) -- inject glue and dry (GT2C10 vertical injecting and drying machine) (4)-- sheet stretching (stretcher) (5) -- punch into shape of ring pull (25T punch) (6)-- the working procedures of blistering, embossing, ruling and riveting in a stroke for the forming of easy open lid (GT2A8 multi-position punch) (7)
3. This production line for the manufacture of tinplate (or aluminum )easy-open cap, The entire production process is fully automated  by PLC, high production efficiency, and saving materials and so on.

EASY OPEN CAP(EOE) LINE

Medical aluminum easy open cap production line

This production line which consists of pull ring machine and easy open cap combining machine is used to produce round, square, oval-shaped etc. and other shaped easy open caps with the merits of full
 Production type:round
 Production capacity:90-120caps/min
 Total power:8.5KW
 Total weight:11800kg

Details

No.1 Stretcher (function: sheet stretching)

General situation: it is used to stretch the sheet for the next working procedure of making ring pull.

No.2  GX1L2 Ring-pull machine (25T open punch + progressive die)

General situation: 25T punch equipped with progressive die is used to punch into shape of ring pull.

No.3 MT-2000-Heavy type material frame

General situation: This machine is used for discharge of coils.

No.4 GT2A8 multi-position punch

General situation: the machine'function is closed to multi-position press machine which can complete the working procedures of blistering, embossing, ruling and riveting in a stroke for the forming of easy open lid/cover.

Easy open cap ( EOE ) line (90-120pcs/min)

This production line which consists of NC punch, circling machine, injecting & drying machine,pull tap machine and easy open cap combining machine is used to produce round, square, oval-shaped etc. an
 Product type: round, ladder type, oval etc shaped easy open caps
 Production capacity: 90-120pcs/min
 Total power: 35KW
 Total weight: 17500kgs

Details

Easy open cap ( EOE ) line (90-120pcs/min)
This production line which consists of NC punch, circling machine, injecting & drying machine,pull tap machine and easy open cap combining machine is used to produce round, square, oval-shaped etc. and other shaped easy open caps with the merits of full automatic, high speed, high quality, stable performance and easy operation. It is suitable for the production of all kinds of EOE ends.

No.1 NCP-008A full automatic NC feeding punch

General situation: full automatic NC punch is made up by automatic feeder, NC transportation table, automatic punch, automatic waste discharger and convey line, controlled by PLC.

No.2 GT2B3A Edge circling machine

General situation: this machine matching with automatic or semi-automatic punch can circle edges of round lids which have been shaped. Adjusting corresponding internal model can adapt to circle edges of different diameter lids.

No.3  GT2C10A vertical injecting & drying machine

General situation: the machine is used for coating and drying for formed easy-open lid/cover for the purpose of rust proof.

No.4 Stretcher (function: sheet stretching)

General situation: it is used to stretch the sheet for the next working procedure of making ring pull.

No.5  GX1L2 Ring-pull machine (25T open punch + progressive die)

General situation: 25T punch equipped with progressive die is used to punch into shape of ring pull.

No.6 GT2A8 multi-position punch

General situation: the machine'function is closed to multi-position press machine which can complete the working procedures of blistering, embossing, ruling and riveting in a stroke for the forming of easy open lid/cover.

No.7 Easy open cap(EOE) mould

No.8 Cap collection,counting and packing unit

General situation: this machine is applied for collecting the finished EOE ends,counting and packing.