Machinery Introduce

1. Separate Type Decoiler with Lubrication and NC Feeder System:

• 
• 

(1.1) Parameter for NC Feeder System

No.	Name	Parameter
1.	Max coil diameter	￠1000mm
2.	Min coil internal diameter	￠80mm
3.	Max coil width	750mm
4.	Max coil weight	500kg
5.	Feeding speed	10-30M/min
6.	Feeding length	30-9999mm
7.	Feeding precision	+/-0.2mm
8.	Motor power	2Kw
9.	Voltage	380V/220V
10.	Weight	1T
11.	Dimension	1200x1200x1100mm (L*W*H)

 

(1.2) Main Feature for our Feeder System:

Our feeding machine is the automatic feeding device which is the ancillary equipment for punching equipment. A machine can realize automatic oiling, automatic feeding, automatic tracking features, which automatically feeding 30-9999mm in length, the length of an arbitrary set, it provide accurate positioning and widely adjusting range.

The device has the characteristics of feeding accuracy, coating the oil evenly, material waste is small, high efficiency, clean appearance, small size and easy installation, simple operation and low noise, it is the ideal automatic feeding device for film, aluminum foil, paper and other metal coils, and also is a reliable guarantee for the success of your project.

2. BLA Series Power Press

(2.1) Configuration parts

• High-precision alloy steel grind bent axle

• High-precision grand tooth surface

• High-Precision Grind gear and axis

• High-precision worm gear and worm shaft

• High-quality copper part

• Double-outlet deflection-prevention load pump

• Taiwan-exported overload pump

• Japan-exported dual valve

• Electric mould-adjusting device

• Dry clutch

• Wet Clutch

• High Precision P5 grade Bearing

• Siemens electric machine

• Imported electronic cam pack

• Eight inch touch screen operation system

• Digital operation panel

• Integrated control system

• Horizontal touch screen operation system

• National famous electrical element

• Four channel tonnage meter

• High quality electric lubricant pump

• High quality electric lubricant pump

• Imported widget

• Material blowing unit

• LED machine tool working lamp

• Airbag assembly of die cushion

• Inflatable shock absorber

• Bottom dead centre detector

(2.2) Quality Guarantee

• Welding process

• Welding process

• Welding process

• Technology for heating process

• Vacuum plasma nitridation metallograhic figure

• Detection for laser interferometer

• Gantry-type three-dimension dictation

• Small three dimensional dictation

• Electric control system

• Surface treatment on oil painting

• Gear grinding processing

• Ball processing

• Processing for machine body

• Processing for machine body

• Sliding block processing

• Subassembly of sliding block

• Flywheel processing

• Piping layout

(2.3) Parameter for Punch press machine

Specification	Unit	TX -25T
Model		V type	H type
Nominal force	KN	250
Occurrence position [capacity occurrence point]	Mm	3.2	1.6
Long stroke [slider stroke]	Mm	70	30
Maximum closed working height [maximum mode height]	Mm	195	215
Slider strokes	Spm	60-140	130-200
Slider adjustment amount [mounting height adjustment amount]	Mm	50
Upper table size [slider surface size]	LRXFB	470×230×50
Lower table size [Workbench size]	LRXFB	680×300×70
Main motor	KWXP	3.7×4
Using air pressure	Kg/cm2	5-6
Overall dimensions (left and right × front and rear × high)	Mm	1280×850×2200
Total Weight	T	2.1

(2.4) Important parts supplier used on machine

Main motor

Category	Product name	Factory
Machinery component	Ball bearing	American Ironwood
	Oil seal	Japan NOK
	O-ring	Japan NOK
	Air bucket	Pressure vessel inspection
	Clutch & brake	Anhui Liyuan
Electricity component	change frequency Device	Delta
	Domestic famous brand
	Contactor	Schneider
	Relay	Schneider
	Operation button	Fuji
	emergency button	Fuji
	Touch screen	Taiwan Delta
	Programmable controller (PLC)	Taiwan Delta
	Angle control / display	Delta
	Indicator light	Schneider
Air component	Solenoid valve & control unit	Japanese SMC
	Pneumatic cylinder	self made
oil component	Overload protection device	Showa, Japan
	Solenoid valve & control unit	Japanese SMC
	Hydraulic cylinder	self made
	Oil block	Shengxiang

(2.5) Main performance and characteristics

The high-rigidity body is designed, the high-quality steel plate is used for welding, and the stability and reliability of the precision of the whole machine are high by relieving the internal stress:
The precision machining is high, the noise is low, and the comprehensive clearance is low;
The symmetrical six- -face long guide rail of the sliding block is used for guiding, so that precision is high, and the operation is stable;
The adjustment of the mold height is precision, safe, convenient and reliable;
The crankshaft, gear set, connecting rod and other components have high comprehensive performance and durability through the hard oxidization, grinding and other process treatment;
The closed high-rigidity body is designed, the high- -quality steel plate is used for welding, and the stability and reliability of the precision of the whole.machine are high by relieving the internal stress;
The automatic thick oil lubrication system is available, so that it is convenient and accurate for supplying the oil; and the oil line alarm function is provided, so as to ensure the smooth operation of the machine tool;
The structural design of the whole machine is reasonable, so as to be convenient for realizing the automatic production, reduce the cost, and improve the efficiency;
The advanced design philosophy is provided, the noise is low, the consumption is low, and the energy is saved.

3. Long Life Container Punch Die

Mold Material:
Mold carrier and mold core DC-53 pruning wound DC-53 (Batter than SKD11) from Japan.

Mold life time:
10000000 times In short, We can provide your both product and molds in best quality.
All of our products and molds are 100% designed and made here, in our factory.
We are confident to satisfy our customers with best value of mold making workmanship.

4. No Wrinkles Container Mould

• 
• 
• 

Sample:

• 
• 
•